OuterImpact is excited to introduce the Modular Red Dot Adapter (MRA) for CZ Tactical Sport 2 Pistol. This product will allow the shooter to utilize a variety of red dot sights on their CZ with one adapter. Great for USPSA Limited Optics, or Testing out IPSC Open, or just for fun on the range! This is for the DOVETAIL of the pistol, it cannot be used a plate for a milled slide, or for an optics ready pistol!

Great alternative to MILLING the slide! The OuterImpact M.R.A. for the CZ TS 2 Pistol answers all the above questions. It is precision-machined the adapter plate from 7075 aircraft aluminum. Thus, the M.R.A. plate is extremely durable and lightweight. As you know, there are violent forces that take place when a gun is fired. Shooters do not want to “worry” about losing zero, because of an inferior mount. This is why they utilize weaver T-10 Torx screws and steel alignment pins to keep everything aligned and in place.

FOR CZ TS2 ONLY – WILL NOT FIT CZ 75/SP-01 OR CZ SHADOW 2

Compatible Red Dot Sights (Mounting Screws INCLUDED):

• Trijicon RMR/SRO – some weapons may experience ejection issues using the SRO
• Docter
• Insight MRDS
• Eotech MRDS
• Leupold Delta Point
• Leupold Delta Point Pro
• Vortex Razor
• Vortex Viper
• Vortex Venom
• Vortex Defender CCW
• Burris Fast Fire 2 & 3 & 4
• CMORE RTS & STS
• Holosun 507 ”C”/407 ”C” V2 and X2 versions – screws included in OuterImpact Screw Pack
• Holosun 507 ”K”/407 ”K” (See Note Below)
• Holosun 508 ”T”
• UTG Reflex Micro Dot
• TruGlo Tru-Tec
• Sig Romeo 3
• Sig Romeo 3 Max
• Sig Romeo 3 XL
• Crimson Trace CTS-1250
• Springfield Hex Dragonfly – must also use OEM provided spacer plate
• Bushnell RXS-100 and 250
• Kahles Helia RD

WILL ALSO FIT WITH ADDITIONAL SCREWS: 

• Shield RMS (requires a purchase of these screws)
• Holosun 507c/407c V1 versions (requires a purchase of 6-40 Screws For Holosun V1 Red Dot)

Mounting Hardware:

• (2) 6-48 Weaver T-10 Torx Head Screws
• (2) Sight alignment pins
• (2) M3 x 8mm Flat Head Screws
• (2) M3 x 6mm Flat Head Screws
• (2) M3 x 6mm Socket Head Cap Screws
• (2) 6-40 Flat Head Screws – RMR
• (2) M4 X 10mm Rounded Head Screws
• (1) Dovetail
•  (1) T-10 Torx driver

Specifications:

• Finish: Black Anodize
• Coating: Anodize
• Dimensions: Height – .34″ Length – 2.02″ Width – 1.06″
• Material: Billet 7075-T6 aluminum. Dovetail is made of Steel with hardened dowel pins.

PLEASE NOTE: 407/507k will fit on the Outerimpact adapters, but they can not use the alignment pins that come with the kit as they are too tall.  Those do not serve a structural purpose, so it is fine not to use them.  You will also need to use the screws that come with red dot to mount it, not any that come with the kit.

Installation Instructions:

MRA Plate Install Video
Burris FastFire II/III Install Video
Trijicon RMR Install Video
CZ TS 2 Adapter to Plate Installation Instruction
Red Dot Pattern Mounting Instructions