Transform the performance of your CZ 75 | SP-01 with the Armory Craft Armory Craft CZ 75 | SP-01 | Shadow 2 Slave Pin – Sear Cage Assembly Tool– designed to assist in reassembly of sear cage, and sear spring.

Performance Benefits:

A must for the installation of the decocker sear cage.  It is impossible to reassemble the sear cage without some kind of slave pin.  So why not get one made to the ideal outside diameter, length, and with a radius on one end, making this pin ideal.  This is the slave pin only.

Please Note:

The Armory Craft slave pin is not what you use to actually reassemble the sear cage.  To reassemble, use the original long frame mounted #13 sear cage pin, and the #23 hammer spring plug retaining pin.  Once you have the sear cage fully assembled, slide the AC slave pin from the RH side of the sear cage with the radius or bevel end first. Then use the original long #13 sear pin, driven from the LH side only, pushing the AC slave pin out from the RH side of the frame. Note the RH side sear pin bore in the frame is smaller than the LH side, this by design to stop the sear pin and properly retain it.  Never, never, drive anything through the RH side other than the AC slave pin, which is smaller than the RH side pin bore in the frame.  Driving any other pin through the RH side sear pin bore will RUIN the frame.

Included:
(1) Custom Slave pin / Sear cage assembly tool