EGW 49511 Trijicon RMR | SRO , Holosun 407c | 507c Mount for Novak Cut
Live Shipping Estimates
Minor modification to the sight base may be necessary for some 1911s including Rock Islands, Citadels, and GSG 1911 .22s.
Material:Â 7075 Aluminum
Coating:Â Matte Black Hardcoat
Overall Length:Â 1.780″
Overall Width:Â 1.1″
Mounting Hardware:Â (2) 6-32 Flat Head Screws, (1) 6-32 X 3/16 Set Screw
Red Dot Fitment: Trijicon RMR / SRO, Holosun 507COMP / HE407C / HE507C / HS407C / HS507C, Swampfox Kingslayer / Liberty / Justice
The EGW red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install.
Simply remove the rear sight on your gun and replace it with our mount in order to mount your Trijicon RMR red dot sight. You can take the EGW mount off and replace your rear sight at any time. Mounting hardware included. Minor modification may be neccessary for Rock Islands. EGW products should be installed and checked by a qualified and competent gunsmith.
– Remove the rear sight*
– Install the EGW Sight Mount in the dovetail
– Tighten set screw (if applicable)
– Place the red dot sight on the EGW Sight Mount
(placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.)
– Apply blue Loctite to the provided mounting screws
– Torque mounting screws to 15in/lbs2 Flat Head Cap Screws – Provided for Trijicon RMRThe screws that are included with this mount require a 5/64” allen wrench for installation.
Modification of your firearm may nullify the manufacturer’s warranty.
No liability is expressed or implied for damage or injury which may result from improper installation or use of this product.
Reviews
There are no reviews yet.