Most Common Optics Requested for this Plate: C-More RTS 3, Vortex Razor

Compatible 1911/2011 Firearms Bomar Rear Sight Cut (including but not limited to):

• STI Edge (either this sight or LPA)
• Les Baer 1911 (adjustable rear sights)
• Colt Gold Cup Trophy with Bomar Rear Sight Cut
• Colt Gold Cup National Match .45acp
• Colt Gold Cup National Match 9mm
• Springfield TRP Operator
• Dan Wesson Bruin (may require fitting due to the Clark cut on the top of the slide)

Compatible Red Dots:

• C-More RTS 2, RTS3, STS2
• Vortex Razor

This is a press fit mount. Utilization of a sight pusher tool may be required

Simply remove the rear sight on your gun and replace it with the EGW mount in order to mount your Vortex Razor, C-More RTS or STS red-dot sight. You can take the EGW mount off and replace your rear sight at any time. Mounting hardware included.

Specifications:

• Material: 7075 Aluminum
• Coating: Matte Black Hardcoat
• Overall Length: 1.831″
• Overall Width: 1.062″
• Dovetail Width: .360″
• Material: 7075 Aluminium
• Model: Bomar Rear Sight Cut

Installation Instructions

• Remove the rear sight*
• Install the EGW Sight Mount in the dovetail
• Tighten set screw (if applicable)
• Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.)
• Apply blue Loctite to the provided mounting screws
• Torque mounting screws to 15in/lbs

The screws that are included with this mount require a 5/64” allen wrench for installation.

Click here to see a video from Vortex on how to install the EGW red dot base on a slide.