45 Degree Offset Optic Mount

The OuterImpact 45 degree offset optic mount is able to accept 3 separate tops. Using the tops available, it is compatible with all of the Red Dots Optics (31) Outerimpact’s current M.R.A. adapters accommodate, the optics using the Aimpoint Micro Standard (38), and also the Trijicon MRO Standard (3) footprints. The mount only takes a couple of minutes to install on any Picatinny Rail type.

The 45 degree offset optic mount is:

• ambidextrous
• low-profile
• lightweight
• steel reinforced
• snag-less design
• retains cheek weld
• can be used to co-witness with Magpul Pro Back Up Offset Sights
• ideal for close-range shooting
• an extremely stable platform for your optic
• precision machined
• Made in the U.S.A.

The 45 Degree Offset Optic Mount is made of billet 7075 aircraft aluminum and is hard coat anodized. The 45 Degree Offset Optic Mount attaches to the rail using a steel dowel reinforced clamp. All mounting hardware is included with the exception of the Aimpoint Micro optics. The OEM optic screws must be utilized.

MRA Compatible Red Dot Sights (Mounting Screws INCLUDED):

• Trijicon RMR/SRO – some weapons may experience ejection
  issues using the SRO
• Docter
• Insight MRDS
• Eotech MRDS
• Leupold Delta Point
• Leupold Delta Point Pro
• Vortex Razor
• Vortex Viper
• Vortex Venom
• Vortex Defender CCW
• Burris Fast Fire 2 & 3 & 4
• CMORE RTS & STS
• Shield RMS – requires a purchase of these screws
• Holosun 507 ”C”/407 ”C” V1 versions – requires a purchase of
  6-40 Screws For Holosun V1 Red Dot)
• Holosun 507 ”C”/407 ”C” V2 and X2 versions
• Holosun 508 ”T”
• UTG Reflex Micro Dot
• TruGlo Tru-Tec
• Sig Romeo 3
• Sig Romeo 3 Max
• Sig Romeo 3 XL
• Crimson Trace CTS-1250
• Springfield Hex Dragonfly – must also use OEM provided
  spacer plate
• Bushnell RXS-100 and 250
• Kahles Helia RD
• Noblex NV G

Compatible Guns:

• Any firearm with a Picatinny rail

Mounting Hardware:

• (1) Foundation
• (1) Clamp
• (2) Steel Dowels
• (1) 6-32 x .5 Torx Head Cap Screw
• (1) M3 x 8mm Socket Head Cap Screws
• (2) 6-48 Weaver T-10 Torx Head Screws
• (2) Sight alignment pins
• (2) M3 x 8mm Flat Head Screws
• (4) M3 x 6mm Torx Flat Head Screws
• (2) M3 x 6mm Socket Head Cap Screws
• (2) 6-40 Flat Head Screws – RMR
• (2) M4 X 10mm Rounded Head Screws
• Torque Driver

Required Installation Tools:

• Extended shank T-10 Bit
• Extended shank T-15 Bit

Please follow mounting instructions included with the optic.

Specifications:

• Material: Billet 7075-T6 aluminum. Dowel pins are made of hardened steel.
• Finish: Black Anodize
• Coating: Anodize
• Dimensions: Height (with MRA Top) – .888″ Length (with MRA Top) – 2.03″ Width (with MRA Top)- 2.30″